GE PQMII - Factory Use Only

5–54 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 5: SETPOINTS
is turned off via the SIMULATION setpoint or via the serial port or until control power is
removed from the PQMII.
• SWITCH INPUT A(D): Enter the switch input status (open or closed) to be simulated.
5.6.6 Factory Use Only
PATH: SETPOINTS ÖØ S5 TESTING ÖØ FACTORY USE ONLY
These messages are for access by GE Multilin personnel only for testing and service.
 FACTORY USE [Z]
ONLY
SERVICE PASSCODE:
0
Range: N/A