6.1 EMC Compliance
Compliance with IEC 60255-26:2013 was used to establish conformity.
6.2 Product Safety
Compliance with IEC 61010-1:2010 was used to establish conformity.
6.3 Installation Category
Compliance with IEC 61010-1:2010 Overvoltage Category II.
6.4 Protective Class
Protective Class I. This equipment requires a protective conductor (earth) to ensure user safety.
6.5 Environment
IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-14, IEC 60255-21-1, IEC 60255-21-2. The
equipment shall always be installed in a specific cabinet or housing which will enable it to meet the
requirements of IEC 60529 with the classification of degree of protection IP54 or above.
6.6 R&TTE Compliance
Radio and Telecommunications Terminal Equipment (R&TTE) directive 99/5/EC.
Conformity is demonstrated by compliance to both the EMC directive and the Low Voltage directive, to zero
volts.
To Next Page
Loading...
