GE Reason RT430 - Password Configuration

GPS Grandmaster Clock
68
RT430-TM-EN-5
Restore: allows transmitting the selected configuration file to the unit. By clicking <RESTORE> a window will
open requiring configuration username and password, according to Figure 35. Enter the username and
password and click <LOGIN>. To cancel de action, click <CANCEL>. During the transmission, the unit will go
momentarily out of operation.
Figure 35: Username and password window to send configuration
4.6.2 Password configuration
It is possible to change the configuration password of the unit.
 New password: allows entering a new configuration password.
 Confirm password: confirmation of the new password entered.
 Apply: allows transmitting the new password to the unit. By clicking <APPLY> a window will open
requiring configuration username and password. Enter the current username and password and click
<LOGIN>. To cancel the action, click <CANCEL>. During the transmission, the unit will go momentarily
out of operation. Once the transmission is concluded, a message appears on the scream informing
the password change Figure 36 shows the username and password window and the message after
transmission.
Figure 36: Username and password window to send new password