go momentarily out of operation. Once the transmission is concluded, a message appears on the screen
informing the PTP parameters change. Figure 33 shows the username and password window and the
message after transmission.
In case the new configuration is not transmitted to the unit, the changes will not be saved and will be
discarded once the Web Interface is closed.
Figure 33: Username and password window, and message after transmitting new time parameters to the unit
4.5.9 Configuration summary
The table below presents all configurable PTP synchronism parameters, and its possible values and
variables.
TABLE 37: Summary of configurable PTP synchronism parameters.
Features defined as non-configurable
Domain number 0, priority 128, and operation as master
All features are configurable
To Next Page
Loading...
