GE Reason RT430 - Serial Port (RS232, RS422;485); Dry-contact Relay (LOCKED); Event Input

RT430
RT430-TM-EN-5
25
Outputs Impedance
15 Ω
Maximum Current
80 mA
It is recommended that the length of cables not to exceed 100m.
1.6.10 Serial Port (RS232, RS422/485)
TABLE 12: RS232 or RS422/485 serial port specifications.
Signal Level
RS232 ou RS422/485
Bitrate
1200, 2400, 4800, 9600, 19200 ou 38400 bps
Databits
7 ou 8
Stopbits
1 ou 2
Parity
nome, ever or add
Connector
DB9 (male), standard DTE
1.6.11 Dry-contact Relay (LOCKED)
TABLE 13: LOCKED dry-cantact Relay specifications.
Switching Capacity
300 mA @ 250 V d.c.
1000 mA @ 125 V d.c.
Contact
Normally Closed
1.6.12 Event Input
TABLE 14: Event Input specification.
Signals
PPS, PPM or other variable frequency signals
Voltage Level
TTL