GE Reason RT430 User Manual

RT430
RT430-TM-EN-5
71
Figure 39: Section to monitor the status of the unit in the Web Interface
The unit status information is grouped into areas, as follows:
 Equipment: shows operational information of the unit.
 Locked: indicates if the unit is receiving information from at least 4 GPS satellites. If yes, the number
of monitored satellites is indicated.
 Antenna: indicates if the GPS antenna is properly connected to the unit.
 Alarm: indicates if the unit is presenting internal failure.
 Time: presents the local time, UTC, off-set and time zone.
 Position: latitude, longitude and altitude information.
 Channels: monitored satellites information (number, phase noise, azimuth and elevation).
5.2.2 General information
The section GENERAL INFORMATION of the Web Interface, shown in Figure 40, allows visualizing system
information of the unit.

GE Reason RT430 Specifications

General

Brand	GE
Model	Reason RT430
Category	Control Unit
Language	English