GE Reason RT430 - Configurations control

RT430
RT430-TM-EN-5
67
4.6 Configurations control
The SETUP section of the Web Interface, shown in Figure 34, allows updating the firmware, manipulating
configurations, changing key, and changing configuration username and password. Firmware and key
updates will be described in Chapter 6.
Figure 34: Section to update firmware, manipulate configurations, change key and change configuration username
and password
4.6.1 Configuration management
 Backup Configuration: It is possible to receive a file with the current configuration of the unit and
store it in a directory on the computer. Saving the final configuration of the unit as a backup is
recommended.
o Download: allows saving the current configuration of the unit in .rt430 format. By clicking
<DOWNLOAD> a window will open to save the file in a directory on the computer.
 Restore Configuration: It is possible to send a configuration file in .rt430 format to the unit.
o File: allows entering the directory and file name of the configuration that will be sent to the
unit.
o Search: allows searching the configuration file in Windows' directories.