GE Reason RT430 - Remote Access (Interface Web)

GPS Grandmaster Clock
70
RT430-TM-EN-5
Figure 38: Navigating the unit's local monitoring display
5.2 Remote Access (Interface Web)
RT430 has a Web Interface that allows monitoring the unit status in real time and checking general system
information.
To connect to the Web Interface, enter the unit ETHERNET port IP address into the address field of a web
browser. For information about factory default for ETHERNET port, see Chapter 3. If the unit is not using
factory default settings, see Section 5.1.2 for instructions to obtain the current IP address.
A start page containing the unit status information opens once you access the Web Interface. The remaining
monitoring and configuring sections are on a menu on the left. To access them, click the desired menu item.
The configuring sections are:
 Status: monitoring the status of the unit in real time.
 General Information: information of the unit system.
5.2.1 Monitoring equipment status
The section STATUS of Web Interface, shown in Figure 39, allows monitoring status information of the unit in
real time.