GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
User Manual TLE Series 600 & 800 CE S1
10.2 OPTIONS IN UPS CABINET
eBoost™ Operation Mode
High efficiency operating mode, where the load is supplied directly by
mains and automatically transferred to inverter if the voltage is out of
prescribed tolerances.
IEMi Operation Mode
(Intelligent Energy Management integrated)
High efficiency operating mode for RPA installations operating in low load
conditions, where the efficiency is maximized by switching one or more
units to a stand-by state, thereby driving the on-line units towards their
higher efficiency operating region.
RPA Kit
Redundant Parallel Architecture
Up to 6 units parallel possible for redundancy or capacity in RPA
configuration.
Surge suppressors
To assure the protection of the UPS in case of high peak voltages from
utility power.
To Next Page
Loading...
