GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
User Manual TLE Series 600 & 800 CE S1
The COMMANDS mode is entered any time
the “COMMANDS” key is pressed.
Allows the user to execute UPS operation
commands.
In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 7.2.
Shows the main screen EVENTS.
See Section 7.3.
Shows the main screen SETUP.
See Section 7.4.
Shows the operating status of the RPA PARALLEL SYSTEM.
See Section 7.6.
Key to reset general alarm and buzzer.
Shows the screen Commands 2.
Shows the screen Commands 1.
To Next Page
Loading...
