Chapter 2. Instrument Setup
30 USM Go Operator’s Manual
2.3.1g Setting Left-Hand or Right-Hand Orientation (SETUP-CONFIG1-ORIENTATION)
1. In the SETUP menu, activate the CONFIG1 submenu using the joystick ( ). Several functions are displayed on the screen.
2. Use the joystick ( ) to select the function titled ORIENTATION, then press the center of the joystick ( ) to activate the
function. Select either RIGHT hand or LEFT hand control.
3. To change the display screen orientation, either move the joystick or press the function toggle.
4. After making your choice, press the center of the joystick ( ) to deactivate the function.
To Next Page
Loading...
