GEA EL48 - Page 67

Handling and assembly
Spreading nozzles assembly (optional)
2018-9015-001
09-2016
67 / 192
Safety cap assembly
● Insert a seal (14) inside the end cap (15);
● Apply grade 2 PRECISION
TM
XL5 MOLY EP2 grease (or equivalent) on the
seal (14);
● Slide the end cap (15) on adapter (2) until it reaches the adapter welded ring;
● Install a circle lock clamp (16) on the end cap and the adapter junction.
Top nozzle assembly
● Insert a seal (14) inside the spreading nozzle (17);
● Apply grade 2 PRECISION
TM
XL5 MOLY EP2 grease (or equivalent) on the
seal (14);
● Slide the spreading nozzle (17) on the adapter (2) until it reaches the adapter
welded ring;
● Install a circle lock clamp (16) over the junction of the spreading nozzle and
of the adapter.