Commissioning
Basics of commissioning
7160-9001-560
01. December 2020
36 / 74
Menu item: Settings -> System -> Behavior Components -> DPNet
Function(s):
● DPNet settings
Please note
The settings are transferred automatically during installation via
DPService.
No changes are required!
2
1
3
4
Set-up Description
1 - General general information
● Type
● Name
2 - V-packs Device assignment
3 - Settings
Settings
● IP address of herd management PC (DPNet host)
● IP address of device (DPNet Device)
● DPNet address of control unit (DPNet Source Address)
● DPNet address of herd management PC (DPNet Destination
Address)
● Installation status
S0 not installed
S1 Service PIN sent
S2 Address received
S3 Network communication restarts
S4 Version information sent
S5 Settings received
S6 Settings sent
S7 Communication table received
S8 Restart (Reboot)
S9 Installation successful
● List of communication partners (ComPartner Table)
● Behaviour component settings (BC Parameters)
4 - Submit Button
● Save settings
To Next Page
Loading...
