Main functions of Prepare menu:
1. Disable steppers: unlock the motor so that you can move them freely.
2. Auto home: automatically homing of each axis
3. Preheat PLA: manually preheat the hotbed and the extruder before printing PLA
4. Preheat ABS: manually preheat the hotbed and the extruder before printing ABS
5. Move axis: manually move each axis and each extruder
Main functions of Control menu:
1. Temperature: You can change the temperature of the hotbed and the extruder in real time in printing
process. Meanwhile you can set the temperature of Preheat PLA and Preheat ABS.
2. Motion: setting of the motion parameters in the firmware. You need choose store memory to save after
altering the setting.
3. Store memory: to save the altered parameters.
To Next Page
Loading...
