142
Output frequency, phase 1
Output frequency, phase 2
Output frequency, phase 3
ID of the used UPS protocol
ID of the used cable type
Configurated time for a complete battery charging
Resttime (AUTONOMTIME-POWERREMAIN)
Battery installation date
Actual measurement for sensors 1-8, used for SensorMan settings
only
TEMP1LOCATION,
…,
TEMP8LOCATION
Configurated sensor 1-8 location
Configurated sensor 1-8 unit
CUSTOM1TEXT,
…,
CUSTOM6TEXT
Configurated Custom Text 1-6
G. Pin layout of Input-sockets of the SENSORMANAGER unit
INPUT 1:
Pin 1 Input Voltage 9-24Volt +
Pin 2 Analog Channel 1 (0-10V+)