Generex CS121L - Page 6

4
4.2.16 SENSORMANAGER 46
4.2.17 RAS Configuration 47
4.2.18 Scheduled Actions 47
4.2.19 Save Configuration / Reboot 48
4.3 Reading the Logfiles 48
4.4 RCCMD 52
4.4.1 RCCMD Jobs 52
4.4.2 RCCMD Traps 52
4.4.3 RCCMD Shutdown 55
4.4.4 Automatic Reset of the Redundancy Alarm 58
4.4.5 RCCMD Message 59
4.4.6 RCCMD Execute/Command 60
Example of use 1: CS121-adapter as RCCMD-listener 60
Example of use 2: CS121-adapter switches an output 60
4.4.7 UPS shutdown 62
4.4.8 Wake On LAN (WOL) 62
4.4.9 Scheduled Actions 63
4.4.10 CS121 for Transfer Switches 63
5. Adapter Software Updates (Firmware) 65
5.1 Firmwareupdate via Setup-tool 65
5.2 Firmwareupdate via FTP 65
5.3 Firmware flash renewal and recovery 66
5.4 How to get the “upsman.cfg” from a CS121 to your computer via FTP 66
6. Additional Software 69
6.1 RCCMD 69
6.1.1 RCCMD with SSL for Windows 69
6.1.2 RCCMD with own SSL certificates 71
6.1.3 RCCMD client as relay station 71
6.1.4 License regulations 72
6.2 jChart 72
6.3 gChart 74
6.4 UPS monitor (UPSMON) 76
7. CS121-Enhancements, Field of applications 77
7.1 SiteSwitch4 (SS4) and SiteSwitch4AUX (SS4AUX) 77
7.1.1 SS4 Feature overview 78
7.1.2 SS4 Contents 78
7.1.3 SS4 Installation 78
7.1.4 SS4 - Technical data 79
7.2 Sensor SM_T_COM 79
7.2.1 SM_T_COM configuration 80
7.3 SENSORMANAGER & SENSORMANAGER II 82
7.3.1 General information 82
7.3.2 Installation and Network integration 83
7.3.3 Special features of theSENSORMANANAGER II 86
7.3.4 Configuration 87
7.3.5 Alarm Matrix of the SENSORMANAGER II 88
7.4 RASMANAGER 89
7.5 GSM Modem – Notification via SMS 90
7.6 LED-Matrix Display 92
7.7 MODBUS/PROFIBUS/LONBUS 93
7.8 UNMS (UPS-Network Management System) 94
8. Troubleshooting – FAQ 95
8.1 Solutions 95
Appendix 104