14
Specific tools
The so-called specific tools refer to those specifically designed for assemble or dismantle of certain
components of the motorcycle. These tools are usually used in specific locations. Appropriate specific tools are
indispensable in the complete and accurate adjustment as well as in the assembly operations. By taking advantage
of specific tools, the components can be safely, reliably and quickly assemble or dismantle, thus enhancing the
work efficiency and saving lots of efforts.
1．tools used for the engine-overhaul
When assembling or dismantling the engine, specifically designed tools should be used for some certain
components to guarantee a smooth dismounting.
The list of specific tools for the assembly and dismantling of engine components and the figure of real objects
can be seen in table 1-1 and table 1-2.
Table 1-1
Name Remarks
Specialized circular wrench
Clutch holder
Flywheel extractor
Spacer gauge
Dismounting tools for bearing
Assembling tools for bearing
Oil-seal dismounting tool
Handle of dismounting tools
Piston pin exhaustion apparatus
Piston ring opening pincer
Heating plug circular wrench
Measure the thickness of clutch
Cylinder diameter tester
Dial dictator
Used for the assembly and dismantle of flywheel
bolt ,figure 1-3
Figure 1-4
Figure 1-5
Figure 1-6
Figure 1-7
Figure 1-8
Figure 1-9
Figure 1-10
Figure 1-11
Figure 1-12
Figure 1-13
Figure 1-14
Figure 1-15
Measure the inner canon of piston pin,Figure 1-16
Successive table 1-2
Figure 1-3 Figure 1-4
To Next Page
Loading...
