110
Install the brake hose assembly of the front brake, and the brake cylinder components（2）.
Prevent brake clutch（3）and break disk from greasing.
*Attention
Presence of grease on friction lining will reduce braking
performance resulting in brake failure.
Screw bolt and nut to the stipulated torque force value.
Torque value ：
Fixing bolt of oil pump body module 5-9 N·m
Mounting bolt of front brake cylinder module 22-29 N·m
Do not allow oil stains to stick to friction lining.
If oil stains stick to friction lining, clean with brake
washing fluid.
*Attention
Oil stains sticking to friction lining will reduce braking
performance.
5.4 Rear drum brake
5.4.1 Disassembly
Remove muffler.
Remove fixing nut of rear wheel (11).
Remove rear wheel.
Remove brake shoe module (4).
*Attention
•Always replace the brake pad in pairs.
•If a brake pad is reused, mark a signal on its side before
To Next Page
Loading...
