43
Inspection/adjustment
Preparation of documents Cylinder pressure
Check list of constant maintenance Gear mobile oil
Engine mobile oil/oil filter Changing gear oil
direction column bearing and handle fixing Diving belt
Inspection/adjustment of accelerator's pull wire Front/back brake free displacement
Air cleaner
The liquid volume examination of break fluid
Spark plug Head lamp
Battery Clutch
Carburator Front/rear suspension system
Ignition timing Bolt/nut/fixture
Rim/tyre Tyre specification
Preparation requirement
General
Warning!
•Before starting engine, please confirm whether there is favorable ventilation and do not start engine in a
closed location for that the exhaust gas contains carbon monoxide which may numb or kill people.
•Under certain condition, gasoline is prone to volatilize and explode so that the working place should be
ventilated and kill the engine and should be free from smoking and lighting in the working area or oil storage.
Please do not disconnect battery when you perform overall lineup; otherwise, internal damage of complete
vehicle components may result.
To Next Page
Loading...
