61
Rear
Compress the rear shock absorber up and down to check the
actuation.
Check whether each part of the rear shock absorber is
damaged or loosened.
Suspense the rear wheel and swing it to check whether the
engine suspension bush is loosened.
Nut/bolt/fixture
Check whether the bolt, nut and fixture of the motorcycle is
loosened.
If so, please tighten to specified torque force value.
Rim/tyre
Check whether there is crack, nail or other damage of the tyre.
Check the tire pressure.
*Attention
The tire pressure should be measured under cold condition.
Compress up
and down