7
Maintenance regulation
As maintaining this vehicle, the instrument of metric system should be applied as possible for the reason that the
application of incorrect instrument may demage this vehicle.
Before dismantling from or frame cover of vehicle to maintain the dirt of parts or external subassembly should be
purged in order to prevent that falling into engine , chasis or braking system.
After dismantling and before measuring attrition value, please
clean parts and purge it with compressor.
The rubber parts will be deteriorated due to aging which is prone to be damaged by solvent or oil and it should be
inspected (if necessary, it should be replaced) before
reinstallation.
Sleeve
To Next Page
Loading...
