Geodesic Sensor Net - Repair; Recycling and Disposal of Nets; For more HCGSN Information; Applying the GSN

2: HCGSN
38
Geodesic Sensor Net Technical Manual S-MAN-200-GSNR-001 • January 31, 2007
Repair
Sponge Replacement
Field replacement of sponges in the HCGSN is described in Chapter 9, "Replacing
GSN Parts.”
Other Repairs
Repairs other than sponge replacement for the HCGSN must be performed by a
trained Net technician and will require the Net to be returned to EGI for servicing (see
Appendix A, "Technical Support”). Please disinfect the Net (see page 81) before
returning it to EGI.
Recycling and Disposal of Nets
See “Component Recycling and Disposal” on page 56.
For More HCGSN Information
• Service and maintenance information is found in Chapter 5, "Service and
Maintenance.”
• Complete instructions on how to apply the Net are given in Chapter 6,
"Applying the GSN.”
• Complete instructions on how to rinse and disinfect the Net after each use are
given in Chapter 7, "Rinsing and Disinfecting.”
• Sponge replacement instructions for the HCGSN are provided in Chapter 9,
"Replacing GSN Parts.”
• Sizing and sensor maps are in Appendix B, "Net Sizing and Sensor Layouts.”