5: Service and Maintenance
56
Geodesic Sensor Net Technical Manual
S-MAN-200-GSNR-001 • January 31, 2007
Net Repairs
Individual electrodes of the GSN 200 sometimes require removal and replacement. To
assess whether an electrode needs to be replaced, see “Faulty Sensors” on page 112.
For instructions on replacing electrodes in the GSN 200, see Chapter 9, "Replacing
GSN Parts.”
Individual sponges may fall out of the HCGSN pedestals. For instructions on
replacing sponges in the HCGSN, see Chapter 9, "Replacing GSN Parts.”
If a Net needs servicing or refurbishment, contact EGI Technical Support
(Appendix A). All Nets returned to EGI for repair undergo thorough examination and
testing, including electrode testing, structural evaluation and repair, pinout
verification, and disinfecting. A repair report detailing all work accompanies the Net
when EGI returns it to the customer. Other services are available on request. Please
disinfect the Net (see page 81) before returning it to EGI.
Some wear over time is normal (refer back to “Average GSN Life Span” on page 53 for
tips on extending the life span). Elastomer breaks in the GSN can be repaired by EGI
Technical Support.
Cable and Connector Checks
• Periodically inspect all cables and connectors for wear or damage.
• Do not use cables and connectors that fail inspection.
• See “Cords, Connectors, and Cables” on page 51.
Component Recycling and Disposal
Caution!:
Please comply with local regulations with regard to recycling or
disposing of EGI components, consumables, and accessories.
You may return components to EGI for recycling or disposal, if desired. Contact
support@egi.com to arrange for this service. Please disinfect the Net (see page 81)
before returning it to EGI.
To Next Page
Loading...