2.2.7
DISTANCE MEASUREMENT SYSTEM CHAPTER 2
GEODIMETER SYSTEM 600
The TRK mode is fully automatic. All measured values will
be updated 0.4 sec. after making contact with the prism. No
keys have to be pressed between measurements. It is worth
pointing out that battery power consumption is a little higher
in this measurement mode compared to the execution of
tacheometry in STD-mode. R.O.E is automatic in this
measurement mode.
Measurement towards moving targets
If you have the Long or Medium Range option installed in
your instrument you can enable/disable a special function
called "Long Range" by accessing MNU 16. If Long Range is
enabled you wwill see the "Long Range" text in the display
every time you press the A/M button in STD or D-bar mode.
If you are unsure whether you have the option installed you
can check that by making a long press on the PRG-key.
In the first row you will find the characters "LR" or "MR"
if you have the options installed.
Long Range Measurements
MNU
1
6
Long
Range
on/off
To Next Page
Loading...