2.10.2
CARE & MAINTENANCE CHAPTER 10
GEODIMETER SYSTEM 600
Overview
Geodimeter System 600 is designed and tested to withstand
field conditions, but like all other precision instruments, it
requires care and maintenance.
Warning: Geodimeter System 600 is designed to withstand
normal electromagnetic disturbance from the environment.
However, the instrument contains circuits sensitive to static
electricity and the instrument cover must not be removed by
unauthorized personnel. If the instrument cover has been
opened by an unauthorized person, the function of the in-
strument is not guaranteed and the instrument warranty
becomes invalid.
Avoid rough jolts and careless treatment.
Keep lenses and reflectors clean. Always use lens paper or
other material intended for cleaning optics.
When the instrument is not being used, keep it protected in
an upright position, preferably in its transport case.
Don't carry the instrument while mounted on the tripod in
order to avoid damage to the tribrach screws.
Servo instruments only: Do not rotate the instrument by the
handle. This may have an effect on the HA ref. How much it
effects the value depends on the quality of the tribrach and
the tripod. Use instead the servo controls to rotate the
instrument.
Don't carry the instrument by the telescope barrel. Use the
handle.
When you need extremely good measurement precision,
make sure the instrument has adapted to the surrounding
temperature. Great variations of instrument temperature
could affect the precision.
❏
❏
❏
❏
❏
❏
❏
To Next Page
Loading...