Applications Zoom | 145
Next step Press OK to return to the APPS menu.
HA (I - II) > 0.9 deg,
measure point
again!
This error occurs if a point was measured in one face
and the measurement in the other face differs by
more than 180° ± 0.9° for the horizontal angle.
VA (I - II) > 0.9 deg,
measure point
again!
This error occurs if a point was measured in one face
and the measurement in the other face differs by
more than 360° - VA ± 0.9° for the vertical angle.
More points or
distance required!
There is insufficient data measured to be able to
compute a position. Either there are not enough
points used or not enough distances measured.
Messages Description
To Next Page
Loading...
Need help?
General
