Functions Zoom | 73
6.2 Distance Offset
Description This function calculates the target point coordinates if it is not possible to set
up the reflector, or to aim at the target point directly. The offset values (length,
trav. and/or height offset) can be entered. The values for the angles and
distances are calculated to determine the target point.
Access 1) Press FNC when within any application.
2) Select Distance Offset from the FUNCTIONS menu.
MP Measurement point
OP Offset point
T_Off Length offset
L_Off Cross offset
MP
OP
L_Off -
L_Off+
T_Off -
T_Off+
To Next Page
Loading...
Need help?
General
