Fault indications and troubleshooting
4
Service instructions
5015108-00 Edition 0403
P02 OP-D
F00 POWER FAIL
Error codes
Fault codes indicate that a serious fault has occurred in the washing process. The fault must be
put right by an authorised service technician.
Acknowledging a fault code
Reset the fault code by:
1. pressing U. The alarm signal is silenced.
2. correcting the fault.
3. The machine is still locked but the current process has been aborted. Pressing U again
drains liquid from the machine and the dirty side door goes down.
Note:
If the draining pump is faulty, the water is not drained from the machine.
NOTE:
The goods in the machine are not clean. Start a new process.
To Next Page
Loading...
