Repair and adjustment
39
Service instructions
5015108-00Edition 0403
V335
Ink ribbon cassette
Paper roll
Printer (extra equipment)
Replacing the paper roll
• Open the front.
• Remove any paper residue.
• Remove the ink ribbon by pressing gently on the left-hand side of the ribbon cassette.
• Cut the end of the new roll at the angle shown in the illustration below. This makes it easier
to thread the paper into the mechanism.
• Insert the point of the paper into the opening of the print mechanism and press the green button
on the printer. The small friction wheel feeds the point of the paper through the opening .
• Replace the ribbon cassette. The printer is now ready to use again.
To Next Page
Loading...
Need help?
General
