Repair and adjustment
7
Service instructions
5015108-00Edition 0403
7. Switch on the power to the machine with the main switch. The display should now show:
GETINGE
Ram OK
or
GETINGE PACS 300
Version X.XX (XXXX)
8. Start Flashloader from PC.
9. Set up as shown.
File name Choose the right program file (*.a37).
Com port The port to which you connected the data cable to your PC.
Baud rate Choose 57600
All Sectors and Verbose must be checked (=selected).
10. Start loading by pressing Program !. The following image appears.
V1578
V1579
To Next Page
Loading...
