Input channel/ Input
First select the input channel you want to acti-
vate/deactivate (horizontally) with the dial [5] or the
navigation buttons [8] [ ] [ ].
Alternatively, you can also use the [+] and [-] keys.
Output channel/ Output
Use the dial [6] or the navigation keys [8] to select the
output channel (vertical) [ ] [ ].
Activate / Deactivate
If you have selected In & Output in the matrix, then press
[ENTER] or use the dial [7] to de-/activate the channel
accordingly.
Mono/Stereo
You have the choice between stereo and mono routings.
Use the dials [5] and [6] or the navigation keys [8] to move
to the symbols.
Press [ENTER] or turn control [7] to switch between the
mono and stereo function.
Exit
Press [F3] to exit the level or any menu key to exit the
entire menu.
Automatic saving takes place.
To Next Page
Loading...
