90 |G3 – Owner’s Manual
11.3.1 IMPORT – WAVE/SOUND
In this menu you can load up to 100 of your own samples from your USB stick into the module.
The total memory is limited to 111MB.
MENU USB Load/Save Wave/Sound
Opening the file manager
Select the memory location to be occupied with the dial [5]
or the navigation keys [8] and open the file manager by
pressing the [F1] key.
You can select a free memory location (--EMPTY--) or
overwrite an already occupied memory location.
At the height of the dial [7], the remaining storage capacity
is displayed (megabytes). The dial has no function.
Deleting the slots
Press [F2] [CLEAR] to delete the contents of the memory
slot.
Exiting the level
Press [F3] to exit the level or any menu key to exit the
entire menu.
Note that in the INSTRUMENT menu, the module accesses the slots and not the file name. Therefore, it
can happen that the sound of an already existing user drum kit is overwritten.
To Next Page
Loading...
