Here you can see directly which trigger is assigned to which
input.
Select Input
Select the input channel with the navigation keys [8] or the
dial [5].
To change individual components, press
[F2] [BANK] or the [ENTER] key.
Load and save
In contrast to the instrument level, the trigger select set-
tings are saved automatically. If you want to additionally
save and name the settings as a separate preset, you can do
this in the submenu [Preset].
An [*] indicates that you have made changes.
Auto On
Turn dial [7] to enable/disable automatic channel detection.
Play a component on your drum kit and the module will
automatically show you the channel played.
Exit the trigger selection by selecting another main menu.
To Next Page
Loading...
