Gewa G3 - 5 Switchig the Device ON and OFF; Connecting Power

G3 – Owner‘s Manual | 23
5 SWITCHIG THE DEVICE ON AND OFF
Connect the supplied mains cable to the AC IN socket on the back of the unit. Follow the safety instructions (
Safety Information)
Insert the mains plug into the socket.
When the mains cable is connected, the [Power] key lights up red. The unit is in stand-by mode. Press the
[Power] key to start the unit.
Wait while the unit starts up.
To save energy, the unit has the "AUTO OFF" function. With the factory setting, the unit shuts down automatical-
ly after 30 minutes of inactivity. You can change this setting at any time in [MENU]  SETUP  Auto Off
1
2
3
4