Second Sound (2nd Sound) allows you to place another
sound on top of a pad sound. When the Second Sound is
activated, both sounds are played simultaneously.
To activate the 2nd Sound for your input, select the menu
item "SECOND SOUND ACTIVE" with the dial [5] or the
navigation key [8] and set it to "ON" with the dial [7]
[<VALUE>], the navigation key [8] with [ENTER].
All setting options are identical to the main sound: Sound
Press [F3] to exit the level or any menu key to exit the
entire menu.
To keep the settings, save the drum kit before changing the
drum kit preset.
For a detailed description of how to load, save and over-
write presets, see: Loading and saving from presets
To Next Page
Loading...
