Gewa G3 - 14.3.6 COMPRESSOR INPUT; GAIN REDUCTION; OUTPUT LEVELS RESPONSE PACKET DESCRIPTION; 14.3.7 TRIGGER SETTINGS EDIT NRPN CONTROLS

138 |G3 – Owner’s Manual
14.3.6 COMPRESSOR INPUT / GAIN REDUCTION / OUTPUT LEVELS RE-
SPONSE PACKET DESCRIPTION
Description
0x4352
Packet Type = "CR" (Compressor Response)
CMP ID
Compressor channel ID (see below)
INP L
Input peak level left
INP R
Input peak level right
GR L
Compressor reduction value left
GR R
Compressor reduction value right
OUT L
Output peak level left
OUT R
Output peak level right
CMP ID is the ID of Compressor channel (0 = Master, 1 = Monitor, 2 = Headphone, "rr" for drum channels)
INP, OUT are values of peak level in dB range from 0 till 70 as follows:
70 = 0dB, 69 = -1dB, 68 = -2dB (1dB steps) ... 64= -6dB ... 0 = -infinite
GR is a value of reduction level in dB range from 0 till 70 as follows:
70 = -70dB, 69 = -69dB, 68 = -68dB (-1dB steps) … 20= - 20dB … 0 = no compression
14.3.7 TRIGGER SETTINGS EDIT NRPN CONTROLS
“rr” is the MIDI note number of the according Pad/Trigger
NRPN
Description
40rrH
Trigger Bank Preset # 0..maxNB (max number of presets depends on factory Trigger Bank)
41rrH
Head/Rim resp. Bow/Edge/Bell*** Gain 0..8
42rrH
Head/Rim resp. Bow/Edge/Bell Threshold 1..127
43rrH
Head/Rim resp. Bow/Edge X-Talk 0..7