G3 – Owner‘s Manual | 137
Request Input / Gain Reduction / Output levels (see below for Response message)
Headphone Output
Parametric 4-Bands
Equalizer
Equalizer ON/OFF 0=OFF, else ON
Low Band Gain 0=-15dB…40h=0dB…7Fh=+15dB
Low Mid Band Gain 0=-15dB…40h=0dB…7Fh=+15dB
High Mid Band Gain 0=-15dB…40h=0dB…7Fh=+15dB
High Band Gain 0=-15dB…40h=0dB…7Fh=+15dB
Low Band Freq. (note 1) 0=20Hz…7Fh=16kHz
Low Mid Band Freq. (note 1) 0=20Hz…7Fh=16KHz
High Mid Band Freq. (note 1) 0=20Hz…7Fh=16KHz
High Band Freq. (note 1) 0=20Hz…7Fh=16kHz
Low Mid Band Q-Factor 0:Q=0.1 …7Fh:Q=8.0
High Mid Band Q-Factor 0:Q=0.1 …7Fh:Q=8.0
Headphone Output
Compressor/Limiter
Compressor ON/OFF: =0 OFF, else ON
Attack time: 0=fast attack (0.1ms), … 60=1ms, …100=10ms, till 127=slow attack (100ms),
exp. Curve
Release time: 0=fast release (10ms), … 60=100ms, … 100=1s, till 127=slow release (~5s),
exp. Curve
Threshold: 127=0dB, 64=-6dB, 32=-12dB, 16=-18dB, 8=-24dB, 4=-30dB, 2=-36dB 0=-Inf
Ratio: 127=1/128, 126=2/128 (1/64), 125=3/128, … 64=64/128 (1/2), … 0=1/1
Request Input / Gain Reduction / Output levels (see below for Response message)
Note 1: 14bit precision when using NRPN MSB+LSB value, 1 Hz step