Gewa G3 - 11.5.3 ROUTING DAW

106 |G3 – Owner’s Manual
11.5.3 ROUTING DAW
If you connect your G3 module to a computer via USB cable,
then you will have the 6 USB-Outs and the sum of the
Master-Outs are available. The table shows the channel
assignment.
DAW Channel
(USB)
1 (Master Out 1)
2 (Master Out 2)
3
4
5
6
7
8
Only the dry signals are sent via the USB channels. Only the Ambient effect is output as well. You can record
the other effects via channels 1&2. Here, the entire sum of the direct outs is reproduced.
Tip: To record only the effects via channel 1&2, deactivate the input channels for the instruments at the
Direct-Outs in the matrix.