Gewa G3 - 11.3 USB LOAD;SAVE

G3 – Owner‘s Manual | 89
11.3 USB LOAD/SAVE
In the "USB Load/Save" menu, you have the option of importing your own samples. In addition, backups and drum kit
preset parameters can be imported and exported.
MENU  USB Load/Save
USB Load/Save
Insert a USB stick into the module. If no stick is recognised,
[INSERT USB STICK] appears on the display. The following
options are available:
===IMPORT=== (load into the module)
Wave/Sound
Import your own Wav-samples to integrate them into your
drum kit.
Backup
Import a backup.
Kit
Import all settings of a user drum kit.
===EXPORT=== (save the contents of the module)
Backup
Create a backup of all parameters and settings of your
module. Previously imported samples will not be saved! !
Current Kit
Save the kit settings (incl. effects) of the currently selected
kit.
Select the corresponding menu item from the list with the
dial [5] or the navigation keys [8] and open the menu by
pressing the [F1] or [ENTER] keys.
Exit the level
Press [F3] to exit the layer or any menu key to exit the
entire menu.
If you want to import files again directly after the export, pull the USB stick out of the module and plug it
in again.