G3 – Owner‘s Manual | 115
The following table lists all available and relevant Continuous Controllers with their controller numbers and description.
Each line is updated together with the selection of a controller number. Active controller numbers are automatically
stored in the G3's device database. The following table shows an expanded view of the underlying menus. Each control-
ling component connected to the corresponding input channels (HH Pedal, Snare, Ride, Toms/Aux) has access to the
same set of available controllers. However, in the factory configuration they are set to different initial values. They go
through the same list, just starting at a different starting point.
G3 Continuous Controllers
Continuous Controller (CC)
To Next Page
Loading...
