With [FX Send], you can assign the effect volume to each
channel specifically.
Select channel
Use the dial [5] [<INPUT>] or the navigation keys [8] to
select the channel you want to change the volume of.
Change volume
Use the dial [7] [<VALUE>], the navigation keys [8] or the
[+] & [-] keys to change the volume.
Grouping
Turn the dial [6] and activate the GROUPING function. Now
you have the possibility, when selecting the tom and cymbal
channels, to adjust them up or down as one unit.
Exit the level
Press [F3], to exit the level or any menu key to exit the
entire menu.
To Next Page
Loading...
