Gilson GX-271 Liquid Handler User’s Guide 4-5
Maintenance
4
Cleaning
7 Pause the priming sequence.
8 After 10 minutes, resume priming the fluid path using distilled or deionized water.
Biological Fluids
Follow this procedure if the fluid path is in contact with biological fluids such as blood products:
1 Prime the fluid path with distilled or deionized water.
2 Make a solution of 10% bleach by adding one part of commercial bleach to nine parts of water.
3 Flush the fluid path using the bleach solution.
4 Pause the priming sequence.
5 After 30 minutes, resume priming the fluid path using distilled or deionized water to pump the remaining bleach solution
from the tubing into a waste container.
To Next Page
