1-5
INTRODUCTION
• Audible and visual confidence signal (fully configurable)
every 15 seconds, confirming to the user that the
instrument is correctly energised and operating normally.
• Motion sensor to detect movement and activate alarms
in a ‘man down’ situation.
• Alphanumeric display with screen backlighting.
Backlighting is coloured green during normal
operation and red during alarm condition.
• Internal electric pump (optional) with a minimum flow rate
of 0.5 litres per minute.
• Fully automatic data logging.
• Powered by an internal Li-Ion (Lithium Ion) rechargeable
battery, this will provide an operating time of up to 14
hours (non-pumped) or 8 hours (pumped). Maximum
recharge time is 4 hours.
• Robust crocodile clip to allow fitting to belt, pocket, etc.
• Communications interface to allow downloading of
stored data.
• Fully certified to international standards.
• Comprehensive range of accessories available.
1.3 DATA LOGGING
Data logging is a standard feature of all PS200 series
instruments and allows gas measurements, event logs, bump
tests and calibration details to be automatically stored and
later downloaded to a Personal Computer (PC) via a USB
connection.
Manual data logging can also be achieved simply via a single
press of the Left Hand (LH) button .
To Next Page
Loading...
