GMI PS200 series User Manual

6-4
USER HANDBOOK
6.1.2 Recharge Instrument using the Automatic Bump
/ Calibration Station
The Automatic Bump / Calibration Station (Part No. 64122 /
64122Q) enables both instrument battery charging and
automatic bump testing and calibration of PS200 series
instruments to verify that they are suitable for use.
The Auto Bump / Calibration Station will accommodate the
PS200 series instrument with or without protective rubber
boot fitted.
Open the lid of the station, illustrated in Fig. 6-2, then insert
instrument, ensuring that it is firmly seated in unit before
closing the lid.

GMI PS200 series Specifications

General

Display	LCD
Alarm Type	Audible, visual, and vibration alarms
Resolution	Depends on the gas being detected
Accuracy	Varies depending on the gas and sensor. Consult the specific sensor datasheet.
Operating Temperature	-20°C to +50°C
Power Supply	Rechargeable Li-ion battery
Pump Type	Built-in sample pump