GMI PS200 series User Manual

2-5
OPERATION
If configured to select during the instrument warm-up cycle,
the user can enable or disable this feature from operation
during the present power cycle, as illustrated in Fig. 2-4.
Fig. 2-4 Enable / Disable Motion Sensor
The motion alarm is latched and generates both audible and
visual alarms.
To cancel the alarm, press and hold the Right Hand (RH)
button
.
2.2.5 Date and Time
The date and time from the instrument’s built-in clock is
displayed on the screen during warm-up, as illustrated in
Fig. 2-5.
Fig. 2-5 Date and Time

GMI PS200 series Specifications

General

Display	LCD
Alarm Type	Audible, visual, and vibration alarms
Resolution	Depends on the gas being detected
Accuracy	Varies depending on the gas and sensor. Consult the specific sensor datasheet.
Operating Temperature	-20°C to +50°C
Power Supply	Rechargeable Li-ion battery
Pump Type	Built-in sample pump