2-4
USER HANDBOOK
2.2.2 Battery Status
Provides the user with the battery charge level, as shown in
previous display. This will be indicated by a battery symbol
with a bar graph showing FULL, 75%, 50% and 25%, which
is shown continually during normal operation.
2.2.3 User Name / Number Only (Option)
This configurable option allows the user to select a name or
identification code, as illustrated in Fig. 2-3. This name or code
will be included with all Bump, Calibration and Event logs.
Refer to ‘USER NAMES’ in ‘CONFIGURATION HANDBOOK,’
Part No. 64182, for further details.
Fig. 2-3 User Name
2.2.4 Man Down Alarm (Motion Sensor) Option
The PS200 series instrument is fitted with a motion sensor.
The sensor is disabled by default but can be configured to be
either selected at start-up, or always on. The motion sensor
will activate an alarm if the instrument is not moved for a pre-
set time.
The time period, before activation of the motion alarm, is
configurable and can be set as detailed in ‘CONFIGURATION
HANDBOOK’. (Refer to section 7-1: Accessories, for details
of this publication).
To Next Page
Loading...
