GMI PS200 series User Manual

3-4
USER HANDBOOK
3.5.1 Quick Bump Test
As the alarm threshold for each range is exceeded, the
audible / visual / vibration alarms will activate and a
symbol will appear, otherwise a symbol will be
displayed.
3.5.2 Full Bump Test
After a short period of time, the gas readings are checked
against configurable limits. The audible / visual / vibration
alarms will activate and a symbol will appear if the
readings are within these limits, otherwise a symbol
will be displayed.
3.6 ALARM CONFIRMATION
The user is then prompted to confirm if the audible and
visual alarms were activated, as shown in Fig. 3-4
Fig. 3-4 Confirm Alarms (4-gas model)
Note: The audible, visual and vibrating alarms activate
for 2 seconds only (default setting) when activated during
the bump test.

GMI PS200 series Specifications

General

Display	LCD
Alarm Type	Audible, visual, and vibration alarms
Resolution	Depends on the gas being detected
Accuracy	Varies depending on the gas and sensor. Consult the specific sensor datasheet.
Operating Temperature	-20°C to +50°C
Power Supply	Rechargeable Li-ion battery
Pump Type	Built-in sample pump