GMI PS200 series User Manual

iv
USER HANDBOOK
O
OFF, INSTRUMENT 2-16
ON, INSTRUMENT 2-2
Operating Display 2-10
OPERATING
PROCEDURE 2-1
OPERATION 2-1
OPERATOR
MAINTENANCE 5-1
Option, Pump 2-15
OPTIONS, BUMP 3-2
OVER-RANGE ALARM
4-6
Over-Range Flammable
Gas Alarm Function 4-3
Oxygen (O2) Alarm Limits
4-3
P
Performance 1-9
PHYSICAL PROPERTIES
1-7
PROCEDURE,
OPERATING 2-1
PROPERTIES, PHYSICAL
1-7
Pump Option 2-15
Q
QUICK / FULL BUMP
TEST 3-3
QUICK BUMP TEST 3-4
R
RECHARGE BATTERY
6-1
RECHARGE
INSTRUMENT BATTERY
6-1
REMOTE SAMPLING
2-14
REPLACE INSTRUMENT
FILTERS 5-1
Replace Sample Inlet
(Dust) Filter 5-3
Replace Sensor
Hydrophobic Filter 5-2
Required, Calibration 4-13
RESET, ALARMS 2-13
RESULT, TEST 3-5
S
SAFETY ii
Sample Inlet (Dust) Filter
5-3
SAMPLING, REMOTE
2-14

GMI PS200 series Specifications

General

Display	LCD
Alarm Type	Audible, visual, and vibration alarms
Resolution	Depends on the gas being detected
Accuracy	Varies depending on the gas and sensor. Consult the specific sensor datasheet.
Operating Temperature	-20°C to +50°C
Power Supply	Rechargeable Li-ion battery
Pump Type	Built-in sample pump