13
GDR11 Digital TV receiver
How to connect the receiver to your TV
1 Put your receiver on a firm, level surface with at least a
10-centimetre gap around all the sides. Make sure it is close to
the TV you are going to connect it to.
2 Turn off the plug socket your TV is plugged into or pull the TV’s
plug out of the socket.
3 Take the aerial lead out of the TV and connect it to the ‘RF IN’
socket on the back panel of the receiver.
4 There are three ways to connect your receiver to your TV.
(See pages 14 and 15).
5 Once you have connected the receiver, plug the receiver’s
power lead into the mains.
6 Plug the TV back into the mains socket.
To Next Page
Loading...
