27
GDR11 Digital TV receiver
How to turn the receiver back on from standby
1 Switch on your TV.
2 Press the receiver remote control button labelled ‘stb’.
3 The receiver standby light will turn green and the TV picture will
come on.
How to tune in TV and radio stations
If this is the first time you have switched on the receiver, see the first
time installation section on page 20.
If this is not the first time you have switched the receiver on, it will
turn on and tune into the last channel you were watching before
you last switched it off.
If the receiver doesn’t find any channels, please read the help and
advice section on page 84.
To Next Page
